2006 J Boats J-100

• Composite hull and deck built with resin infusion molding system using biaxial and unidirectional glass fabrics with Baltek end-grained balsa core.
• White gel coat hull with single bootstripe.
• Large sit-in cockpit with 9.5’ seats having comfortable 13.75” backrests, suitable for cockpit cushions.
• Two cockpit seat storage lockers.
• One lazarette storage locker.
• One foredeck anchor locker with overboard drain.
• Swimming and boarding platform sculpted into aft face of full height transom with integral safety ladder.
• Molded companionway seahood and dodger spray shield bosses.
• GRP molded main structural bulkhead, bonded to hull and deck as support for shroud chainplates with single opening to head and forepeak.
• Longitudinal and transverse keel support beams and integral mast step.

• Two 40:1 self-tailing primary winches mounted on cockpit coaming.
• Two 35:1 self tailing secondary winches mounted on cabin trunk.
• Triple sheave deck organizers (P&S).
• Two lock-in winch handles.
• Two PVC winch handle holders.
• Custom stainless mast collar.
• Mast mounted turning blocks
• Halyard & reef line rope clutches on the cabin top.
• One single rope clutch for tack line or jib boom outhaul.
• Cam cleats on cabin top and mounted near primary winches (for lazy spin sheets).
• Two fixed jib tracks each with plunger style jib cars.
• Mainsheet traveler track recessed in cockpit seat with 4:1 traveler control system.
• 6:1/24:1 rough tune/fine tune mainsheet system leading to aluminum bracket on centerline fore and aft of traveler.
• Four SS mooring cleats (2 fwd, 2 aft).
• Foredeck ventilation hatch.
• Two fixed ports in sides of cabin trunk.
• Molded companionway sliding hatch and acrylic offshore dropboard with inside/outside opening hasp
• Cockpit operated bilge pump.
• Two 12"x 20" polypropylene mesh line bags.
• Custom SS chainplates, stemhead and backstay tang.
• Double lifelines with gates and stainless bow pulpit & stern rail.
• Five (5) folding padeyes: one for spinnaker tack attachment on bow, and four attachment points for spinnaker blocks.
• Stainless steel handrails on cabin house.

• Tapered carbon fiber mast with double airfoil aluminum spreaders, main, jib, spin halyard and topping lift sheaves, spin/whisker pole track with sliding eye on front of mast, Harken System “A” mainsail luff track; mast finished in Awlgrip off-white.
• G10 fiberglass mast step with fore/aft adjustment slots and SS padeye for through bolt securing of mast to step.
• Aluminum boom with provision for 2 reefs, 6:1 internal mainsail outhaul, finished in Awlgrip off-white.
• Continuous rod rigging with turnbuckles.
• Remote panel hydraulic backstay adjuster.
• Rigid boom vang with integral cleating.
• Headsail furler with control leading aft to cockpit.
• Complete running rigging package.

• Lead & antimony fixed 5.75' draft, fin keel with bulb bolted to a deep molded sump.
• Balanced hi-aspect spade rudder constructed using "E" glass with stainless rudder post and self-aligning Jefa rudder bearings.
• Curved laminated wood tiller with adjustable tiller extension.

• One 95 amp battery.
• 12V DC battery switch.
• 12V DC electrical distribution panel w/ 8 circuit breakers.
• Navigation & steaming lights.
• Bonding system.
• Two swiveling halogen reading lights.
• One dome light in main cabin.
• One fluorescent light in head.
• Automatic electric bilge pump and panel switch for manual operation.

• Off-white laminated paneling with varnished teak trim oval door opening and white door.
• Teak and holly synthetic high-wear cabin sole.
• Two-tone (beige) molded nonskid floor in head area.
• Teak trimmed backrest outboard of each settee berth.
• Marine head with 14 gal holding tank and "Y" valve.
• Molded sink with overboard drain in head.
• Holding tank overboard discharge manual pump.
• Teak trimmed storage bin to starboard of head.
• Settee cushions.
• Vinyl liner on main cabin & head overhead and hull.

• Contrasting Non-Skid Color on deck.
• Varnished teak toe-rails with amidships chocks and scupper drains.
• “Wide-Opening” Lifeline Gate (P&S) from stern rail to first stanchion.
• V-Berth Package: V-berth platform with two cushions and one swiveling Halogen reading lamp.
• Freshwater System with 5 gallon water tank, spigot and foot pump in head.
• Hoyt self-tacking jib boom. Removed from boat, but available with purchase. Mounting hole is in deck and covered.
• Sail/Boom cover
• Jib sock for furling jib
• Tiller cover
• Tacktick Race Master
• 400 Watt Mobile Power Outlet Inverter
• Fenders, docklines and some safety gear

• Quantum Carbon mainsail
• Quantum Carbon jib
• 2 Quantum Asymmetric spinnaker 2
• Sail Area
  IJPE : 478.00 sq ft
  I : 38.50 ft
  J : 11.50 ft
  P : 38.00 ft
  E : 13.50 ft
  Working Sail Area : 478.00 sq ft
• UPDATE December 2023;
• New Quaantum Mainsail (2024) full battened
• New Quaantum jib (2024)

*2021 New sail covers

*2022 Professionally bottom stripped & new barrier coat plus VC 17

*Cradle for storage